How to deal with the LED display of water inflow?
Oct 28, 2021
In the process of ordinary use, LED display screen is easy to encounter various fault problems. In particular, the administrator of LED display screen also has some relatively low installed displays. Installing low LED display screen is easy to be artificial, such as water inflow. Today we will talk about how to deal with the water inflow of full-color LED display screen.
What if the LED display screen is flooded?
1. Absorb a large amount of water with cloth or towel as soon as possible, and dry it next. Pay attention to the power-off operation.
2. After drying the screen, continue to power on and aging. The specific operation steps are as follows:
Phased operation: the full white brightness of the screen is 10%, and the power on aging time is 8-12 hours.
The full white brightness is 30% and the time is 12 hours
The full white brightness is 60% and the time is 12-24 hours
All white brightness is 80% and the time is 12-24 hours
The full white brightness is 100% and the time is 8-12 hours
3. There is basically no problem after completing the above steps, but the following points should be paid attention to during the operation:
a. When water enters the screen, corresponding measures shall be taken in time without delay.
b. Quickly dry the water inlet screen.
c. Do not put the flooded screen into the aviation box, which may cause damage to the LED bulb.
d. Pay attention to whether there is water in the aviation box.
e. If the screen body after water inflow is not treated in time, it may affect the stability of the screen body, and the dead lamp may be found during power on aging.
f. If the water inlet LED display screen is in the aviation box for more than 72 hours, it is basically of no repair value. Please handle it carefully.
The above is the emergency treatment scheme corresponding to the water inflow problem of LED display screen. Suitable for any LED display.
