How To Maintain And Use The LED Display When The Ambient Humidity Is Too High?

①About the LED display in use

1, line, switch check, keep the switch dry, avoid leakage, electric shock accident.

2. Moderate ventilation can help the water vapor attached to the display to evaporate quickly and reduce the relative humidity of the indoor environment.But avoid ventilating on windy, humid days, which can increase indoor humidity.

3, can use air conditioning to dehumidify and place desiccant and physical hygroscopic method, keep dry, prevent moisture display. 
4. When renting indoor LED display screen is used outdoors, it must be immediately cut off in rainy days. If it is too late to remove the screen, use a prepared tarp to cover it quickly, and wait until the weather is fine to take out the box to air.If the continuous rain, to open the back cover of the box, with the fan open cold air dry.Then put in a ventilated dry room for more than 8 hours.Low brightness, ensure lit 4 hours above, send out the moisture in electronic components adequately.
5. During the plum rain season, the LED screen should be used at least once a week, open the screen at least once a month, and light up for more than 2 hours.
6. The use environment of outdoor display screen is complex, and it is inevitable that there will be water seepage in the cabinet. In addition to the above measures, usually need to check regularly whether the waterproof apron of the box body is aging, deformation, incomplete;Sealing cabinet screw or lock is easy to loose and the pressure is not enough.
7. If the display screen is not use for a long time, it should be regularly powered up for maintenance and debugging. If the indoor LED display screen or outdoor LED display screen is not used for a long time, there is a high probability of dead lamps and blind points when it is enabled again. Know the correct maintenance knowledge, can completely avoid this kind of problem.

②．How to save a damp LED display

1, at the fastest speed with a fan or other tools, will be damp LED display screen body completely dry.

2. The screen body should be fully blown dry and energized aging. The specific steps are as follows:

A. Turn the brightness (all white) to 10%, and the battery will age for 8-12 hours.

B. Turn the brightness (all white) to 30%, and the battery will age for 12 hours.

C. Turn the brightness (all white) to 60%, and the battery will age for 12-24 hours.

D. Turn the brightness (all white) to 80%, and the battery will age for 12-24 hours.

E. Turn the brightness (all white) to 100%, and the battery will age for 8-12 hours.

③How to store the LED display
1. Keep the flight cases and packing box dry, place desiccant and dehumidifying media, and dry the material enclose the box in time when it enters the water vapor, and do not let it touch the water.

2, screen storage warehouse must be dry, high position, it is best to place industrial dehumidifier in the warehouse.

3, after wet weather, the storage of LED display light detection, if necessary to seek technical support from the manufacturer.

④Finally moisture-proof summary
1. Choose high-quality LED display screens produced by high-quality manufacturers;Such as Royal display, LED display screen production of high quality manufacturers

2. Regular inspection and maintenance to eliminate accidents and improve service life;

3. Technicians should develop good use habits and learn scientific use methods.