Precautions For Led Display
Dec 05, 2020
1. Switch sequence:
When turning on the screen: turn on first, then turn on the screen.
When turning off the screen: turn off the screen first, then turn off.
(Turn off the computer first without turning off the display screen, it will cause the display body to have bright spots, the led display screen will burn the lamp tube, and the consequences will be serious.)
2. The interval of switching screens should be greater than 5 minutes.
3. After the computer enters the engineering control software, the screen can be powered on.
4. Avoid turning on the screen in the state of full white screen, because the impact current of the system is the largest at this time.
5. Avoid turning on the screen in an out of control state, because the inrush current of the system is the largest at this time.
6. When there is a very bright line in a part of the electronic display, you should turn off the screen in time. It is not advisable to turn on the screen for a long time in this state.
7. The power switch of the display screen often trips, so check the screen or replace the power switch in time.
8. Regularly check the firmness of the hooks. If there is any looseness, pay attention to timely adjustment, re-reinforce or update the hanging parts.
9. When the ambient temperature is too high or the heat dissipation conditions are not good, the LED lighting should be careful not to turn on the screen for a long time.
