LED Display Is Installed in A Variety Of Common Seven Methods
Jul 19, 2021
1. Inlaid, inlaid structure is in the wall on the hole, the wall body all inlaid in the wall, it uses the front maintenance, display unit plate with strong magnetic material paste in the frame structure.
Requirement hole size and LED display frame size, and do appropriate decoration, in order to facilitate the maintenance of the wall of the hole must be through, otherwise need to use the former disassembly mechanism. Embedded installation is not conducive to heat dissipation of the screen body.
2. Lifting type, suitable for small screen area, light weight, the height of the screen body is generally less than 6 meters, can be directly hung on the load-bearing wall. Standard hanging parts can be used for indoor load-bearing concrete roof, and the length of hanging beam and derrick depends on the site condition. The interior steel beam is hoisted by steel wire rope, and the coat is decorated with steel pipe in the same color as the screen body.
3. Ordinary mounting, can be directly hung on the load-bearing wall, large area of general use after maintenance, small screen before the use of maintenance without leaving space for maintenance.
4. Rotating bracket mounting, suitable for the weight of more than 100kg, screen height and width are greater than 1200mm display, must be installed on the load-bearing wall, because its general area is large, disassembly is difficult, so through the screen body rotation to solve the maintenance space.
5. Floor installation is divided into two forms: fixed type and movable type. The movable installation with the roller is suitable for the small area, light weight display.
6. Swing arm type installation is mainly to facilitate the maintenance of the back of the screen body and the heat dissipation of the screen body. Swing arm type installation should be based on the screen body area, weight and other parameters to design the structure of the frame. The pendulum wall can be designed to be movable or fixed.
7. The column is stacked, and the column is divided into single column, double column and multiple column.
There are usually three ways for indoor LED display frame: aluminum alloy outsourcing, brown aluminum alloy, stainless steel and pull gold integration.
(1) aluminum alloy outsourcing stainless steel frame, using brushed stainless steel, beautiful, generous.
(2) the tan aluminum alloy frame structure is simple, the frame color is close to the background color of the display screen.
(3) pull gold integration structure, its color is Sony gray, easy to be accepted by the vision. In addition, the overall structure is relatively compact, no gap. Its disadvantage is the size of the LED display area requirements.
