What Should We Do When The LED Screen Is Flooded
May 06, 2021
What should we do when the LED screen is flooded
LED display in the ordinary use of the process, easy to meet a variety of failure problems, especially some installation of relatively low display, installation of low LED display is more likely to give human accidents, such as water.Today we will talk about what should we do when the full color LED display is flooded.
1, when it is found that the screen is flooded;We should use the cloth or towel to absorb most of the water, the next step is drying, Attention! We need to power down before we do all operation.
2, after drying the screen body continue to energize aging, the specific steps are as follows:
Staged operation: the all-white brightness of the screen is 10%, and the battery aging time is 8-12 hours.
Full white brightness is 30% and the duration is 12 hours
Full white brightness is 60% and the duration is 12-24 hours
Full white brightness is 80% and the duration is 12-24 hours
Full white brightness is 100% and the time is 8-12 hours
3. There is basically no problem to complete the above steps, but the following points need to be paid attention to during the operation:
A. When the screen body is flooded, corresponding measures should be taken in time, and no delay.
B. Rapid drying of the influent screen body.
C. Do not put the flooded screen into the flight cases, which may cause damage to the LED lamp bead.
D. Pay attention to whether the flight cases is flooded.
E. If the screen body after water is not treated in time, it may affect the stability of the screen body, and the phenomenon of dead light may be found in the process of electrification and aging.
F. If the flooded LED display body is left in the flight cases for more than 72 hours, it is basically of no repair value, please handle with caution.
The above is the LED display is flooded problem corresponding to the emergency treatment plan.Suitable for any LED display.
